GDS Racing Mod1 54T Steel Spur Gear 54 Tooth for RC Truck Fit X-MAXX 1/5, Manual Gear Mesh Setting Required
GDS Racing Mod1 54T Steel Spur Gear 54 Tooth for RC Truck Fit X-MAXX 1/5, Manual Gear Mesh Setting Required

GDS Racing Mod1 54T Steel Spur Gear 54 Tooth for RC Truck Fit X-MAXX 1/5, Manual Gear Mesh Setting Required

Regular price
$24.00
Regular price
Sale price
$24.00
Unit price
per 
Availability
Sold out
Shipping calculated at checkout.

Replacement spur gear for Traxxas E Revo2, X-Maxx 6S, 8S, and XO-1.

Teeth: 54
Pitch: 1.0 metric pitch (M1, Mod1)
Thickness: 8mm
Diameter: 2.2" (56mm)

Requirements:
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Please manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.